Trunk / Liftgate Shock / Support: Service and Repair

TRUNK LID

TORSION BAR : Removal and Installation


REMOVAL

1.Remove torsion bar clips.
2.Support the trunk lid assembly using a suitable tool.

WARNING:
Bodily injury may occur if hood assembly is not supported properly when removing hood assembly.





3.Lift torsion bar (1) using a suitable tool (A) as shown to remove.
NOTE:





The suitable tool specifications are as shown.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
After installation check the trunk lid open/close, lock/unlock operation.