Removal And Installation

REAR PARCEL SHELF FINISHER

Removal and Installation


REMOVAL

1.Remove the high-mounted stop lamp. Refer to "Removal and Installation" Service and Repair.
2.Remove the reat seat bolsters (LH/RH). Refer to "Removal and Installation Rear Seat Bolster" Rear Seat Bolster.
3.Remove the rear pillar finishers (LH/RH). Refer to "REAR PILLAR FINISHER : Removal and Installation" Rear Pillar Finisher.
4.Remove the seatback latch finisher, top tether strap anchor finisher and seatback lock finisher from the rear parcel shelf finisher. Refer to "Exploded View" Exploded View.





5.Release the rear parcel shelf finisher clips and pawls.
Broken triangle indicates : clip
Broken circle indicates : Pawl

6.Remove the seat belts from the rear parcel shelf finisher.
7.Remove the rear parcel shelf finisher.

INSTALLATION

Installation is in the reverse order of removal.