Intake Valve Timing Control Solenoid Valve (LH) (Bank 2)

INTAKE VALVE TIMING CONTROL

Intake Valve Timing Control Solenoid Valve (LH) (bank 2)


REMOVAL

1.Remove hood ledge cover.
2.Remove coolant reservoir and set aside.
3.Disconnect intake valve timing control solenoid valve LH (bank 2) harness connector.
4.Remove intake valve timing control solenoid valve cover LH (bank 2). Refer to "Removal and Installation" Removal And Installation.
5.Remove intake valve timing control solenoid valve LH (bank 2) and O-ring from intake valve timing control solenoid valve cover LH (bank 2).

CAUTION:
Do not reuse O-ring.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
- Do not reuse O-ring.
- Replace the O-ring for the intake valve timing control solenoid valve LH (bank 2) with a new one, then lubricate O-ring with engine oil before installing.