Intake Valve Timing Control Solenoid Valve (RH) (Bank 1)

INTAKE VALVE TIMING CONTROL

Intake Valve Timing Control Solenoid Valve (RH) (bank 1)


REMOVAL

1.Remove hood ledge cover.
2.Remove coolant reservoir and set aside.
3.Support engine using suitable tool.
4.Remove upper torque rod, engine mounting insulator (RH), and engine mounting bracket (RH). Refer to
"Removal and Installation" Removal And Installation.
5.Disconnect intake valve timing control solenoid valve (RH) (bank1) harness connector.
6.Remove intake valve timing control solenoid valve (RH) (bank1) and O-ring from intake valve timing control solenoid valve cover (RH) (bank1).

CAUTION:
Do not reuse O-ring.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
- Do not reuse O-ring.
- Replace the O-ring for the intake valve timing control solenoid valve (RH) (bank 1) with a new one, then lubricate O-ring with engine oil before installing.