Removal And Installation

AIR CLEANER AND AIR DUCT

Removal and Installation


REMOVAL

1.Remove engine room cover. Refer to "Removal and Installation" Removal And Installation.
2.Remove duct sub-cover and front air duct.
3.Disconnect the blow-by hose.
4.Disconnect the tube clamp at the electric throttle control actuator and at the air duct hose and resonator assembly.
5.Remove air duct hose and resonator assembly.
6.Disconnect mass air flow sensor.
7.Remove mass air flow sensor from air cleaner assembly, as necessary.

CAUTION:
Handle mass air flow sensor with care.
- Do not shock it.
- Do not disassemble it.
- Do not touch its sensor.
8.Disconnect transaxle breather hose.
9.Remove air cleaner assembly.

INSPECTION AFTER REMOVAL

Inspect air cleaner case assembly, front air duct, air duct hose and resonator assembly for cracks or tears.
Replace as necessary.

INSTALLATION

Installation is in the reverse order of removal.