P072D

P072D STUCK IN 2GR

DTC Logic


DTC DETECTION LOGIC







DTC REPRODUCTION PROCEDURE


CAUTION:
- " "Diagnosis Procedure" " must be performed before starting "DTC CONFIRMATION PROCEDURE".
- Never perform "DTC CONFIRMATION PROCEDURE" before completing the repair, which may cause secondary malfunction.
- Always drive vehicle at a safe speed.

1. PREPARATION BEFORE WORK

If another "DTC CONFIRMATION PROCEDURE" occurs just before, turn ignition switch OFF and wait for at least 10 seconds, then perform the next test.
- GO TO 2.

2. CHECK DTC DETECTION

1.Start the engine.
2.Drive the vehicle.
3.Maintain the following conditions for 5 seconds or more.





4.Check the first trip DTC.
Is "P072D" detected?
YES- Go to "Diagnosis Procedure" .
NO- INSPECTION END


Diagnosis Procedure


1. MALFUNCTION CAUSE SIMULATION TEST

Refer to "Intermittent Incident" Intermittent Incident.
Is the check result normal?
YES - Replace the transaxle assembly. Refer to "Removal and Installation" Removal and Replacement.
NO- Repair or replace the malfunctioning parts.