P072F

P072F STUCK IN 4GR

DTC Logic


DTC DETECTION LOGIC







DTC REPRODUCTION PROCEDURE


CAUTION:
- " "Diagnosis Procedure" " must be performed before starting "DTC CONFIRMATION PROCEDURE".
- Never perform "DTC CONFIRMATION PROCEDURE" before completing the repair, which may cause secondary malfunction.
- Always drive vehicle at a safe speed.

1. PREPARATION BEFORE WORK

If another "DTC CONFIRMATION PROCEDURE" occurs just before, turn the ignition switch OFF and wait for at least 10 seconds, then perform the next test.
- GO TO 2.

2. CHECK DTC DETECTION

1.Start the engine.
2.Drive the vehicle.
3.Maintain the following conditions for 5 seconds or more.





4.Check the first trip DTC.
Is "P072F" detected?
YES- Go to "Diagnosis Procedure" .
NO- INSPECTION END


Diagnosis Procedure


1. MALFUNCTION CAUSE SIMULATION TEST

Refer to "Intermittent Incident" Intermittent Incident.
Is the check result normal?
YES - Replace the transaxle assembly. Refer to "Removal and Installation" Removal and Replacement.
NO- Repair or replace the malfunctioning parts.