Without Intelligent Key System

TRUNK LID LOCK

TRUNK LID OPENER HANDLE : Removal and Installation


REMOVAL

1.Remove front kicking plate (LH). Refer to "KICKING PLATE INNER : Removal and Installation" Kicking Plate Inner.





2.Release pawl using a suitable tool (A) and open the harness clip.
Broken circle indicates: Pawl
3.Position floor carpet aside as necessary to access the trunk lid opener handle bolts.
4.Remove the trunk lid opener handle bolts.
5.Remove trunk lid opener cable from trunk lid opener handle.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
- After installation, check trunk lid open/close, lock/unlock operation.
- After installation, perform the trunk lid adjustment procedure. Refer to "DOOR ASSEMBLY : Adjustment" Without Intelligent Key System.