Rear Pillar Finisher

BODY SIDE TRIM

REAR PILLAR FINISHER : Removal and Installation


REMOVAL

1.Partially remove rear body side welt. Refer to "BODY SIDE WELT : Removal and Installation" Body Side Welt.
2.Remove rear seat cushion. Refer to "Removal and Installation Seat Cushion Assembly" Seat Cushion Assembly.
3.Remove the rear seat bolster. Refer to "Removal and Installation Rear Seat Bolster" Rear Seat Bolster.





4.Release rear pillar finisher clips and metal clips using a suitable tool (A) and remove rear pillar finisher by pulling outward.
Broken triangle indicates: Clip
Broken square indicates: Metal clip

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
When installing rear pillar finisher, make sure that clips and metal clips are securely pressed in body holes.