Description

ADDITIONAL SERVICE WHEN REPLACING TRANSAXLE ASSEMBLY

Description

Perform the following work after the transaxle assembly is replaced.
- The TCM acquires calibration data (individual characteristic value) of each solenoid that is stored in the
ROM assembly (in the control valve). This enables the TCM to perform accurate control. For this reason, after the transaxle assembly is replaced, it is necessary to erase the calibration data that is stored in the
TCM and load new calibration data.
- TCM learns indicated pressure for appropriate control of the transaxle assembly and records the learned values. For this reason, the leaned values stored in TCM must be erased after replacing a transaxle assembly.