Removal and Installation

FLUID COOLER TUBE

Removal and Installation


WARNING:
- Do not open the radiator cap or drain plug when the engine is hot. There is a danger that hot liquid may spray out, causing serious injury.
- Perform these steps after the coolant temperature has cooled sufficiently.

CAUTION:
Do not reuse copper sealing washers.
NOTE:
Lift up the vehicle and perform the work from below.

REMOVAL

1.Remove fluid cooler hose and fluid cooler tube A.
2.Disconnect the washer from fluid cooler tube A.
3.Remove fluid cooler hose and fluid cooler tube B.
4.Disconnect the washer from fluid cooler tube B.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
Do not reuse copper sealing washers.





When installing the fluid cooler tube A (1) and B (2) onto the transaxle assembly, install it so that it is in contact with the transaxle case rib (A).