Removal And Installation

WASHER NOZZLE & TUBE

WASHER NOZZLE : Removal and Installation


REMOVAL

1.Remove cowl top cover. Refer to "Removal and Installation" Removal And Installation.





2.Disconnect washer tube from washer nozzle (1).
3.Place cowl top cover (2) up side down, then release washer nozzle pawl to remove as shown.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
- The spray positions differ, check that left and right nozzles are installed correctly.
- Adjust the nozzle spray pattern. Refer to "WASHER NOZZLE : Inspection and Adjustment" Inspection And Adjustment.