Front Door Window Regulator: Service and Repair

Window Regulator Replacement - Front Door

Removal Procedure

1. Remove the front door outside handle. Refer to Door Handle Replacement - Front Outside (Service and Repair) .
2. Remove the front door window run channel assembly. Refer to Window Run Channel Replacement - Front Door (Window Run Channel Replacement - Front Door) .
3. Remove the front door lower speaker. Refer to Speaker Replacement - Front Door in Entertainment.
4. Disconnect the mirror electrical connector.
5. Disconnect the 4 electrical connector rosebuds (2 at the mirror and 2 under the speaker).




6. Loosen the 2 rear module bolts.
7. Remove the 4 remaining module bolts.
8. Remove the 3 latch bolts from the door shut face.
9. Disconnect the door harness at the door jamb.
10. Remove the window regulator module from the door.



Installation Procedure





1. Install the window regulator module into the door.
2. Connect the door harness at the door jamb.

Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the 3 latch bolts to the door shut face.

Tighten the bolts to 10 N.m (89 lb in).

4. Install the 4 module bolts.

Tighten the bolts to 8 N.m (71 lb in).

5. Connect the 4 electrical connector rosebuds (2 at the mirror and 2 under the speaker).
6. Connect the mirror electrical connector.
7. Install the front door lower speaker. Refer to Speaker Replacement - Front Door in Entertainment.
8. Install the front door window run channel assembly. Refer to Window Run Channel Replacement - Front Door (Window Run Channel Replacement - Front Door) .
9. Install the front door outside handle. Refer to Door Handle Replacement - Front Outside (Service and Repair) .