B1583

Diagnostic Chart:

Schematics:

CIRCUIT DESCRIPTION
The driver mirror horizontal position sensor is a potentiometer. The driver door module (DDM) determines the horizontal position of the mirror based on the signal voltage from the sensor.

CONDITIONS FOR RUNNING THE DTC
The DDM must be powered up.

CONDITIONS FOR SETTING THE DTC
The driver mirror horizontal position sensor voltage is above 4.75 V for 2 seconds in the requested position.

ACTION TAKEN WHEN THE DTC SETS
Memory movements on this axis are disabled. Manual movements are not disabled.

CONDITIONS FOR CLEARING THE DTC
When the DDM no longer senses the failure.