B1593

Diagnostic Chart:

Schematics:

CIRCUIT DESCRIPTION
The driver mirror vertical position sensor is a potentiometer. The driver door module (DDM) determines the vertical position of the mirror based on the voltage from the sensor.

CONDITIONS FOR RUNNING THE DTC
The DDM must be powered up.

CONDITIONS FOR SETTING THE DTC
The driver mirror vertical position sensor is above 4.75 V for 2 seconds in the requested position.

ACTION TAKEN WHEN THE DTC SETS
Memory movements on this axis are disabled. Manual movements are not disabled.
The sensor will be deactivated and the DDM will ignore the signal. The DDM will respond to inputs from other non failed sensors.

CONDITIONS FOR CLEARING THE DTC
When the DDM no longer senses the failure during the self test.