Operation CHARM: Car repair manuals for everyone.

Instrument Panel Cluster (IPC) - Replacement




REMOVAL PROCEDURE
1. Remove the IP cluster bezel.
2. Remove the instrument cluster bolts.
3. Remove the instrument cluster.
Gently pull the cluster straight out in order to disconnect the electrical connector.

INSTALLATION PROCEDURE
1. Align the instrument cluster to the IP carrier alignment pins.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the instrument cluster bolts.

Tighten
Tighten the instrument cluster bolts to 2.2 N.m (19 lb in) in the following sequence:
2.1. Upper left
2.2. Lower right
2.3. Upper right
2.4. Lower left

3. Install the IP cluster bezel.
4. Synchronize the IP cluster. Refer to the following procedure.