Front Seat Replacement - Bucket

Front Seat Replacement - Bucket

Removal Procedure




1. Remove 5 mounting bolts that secure the front seat assembly to the vehicle.
2. Disconnect the seat belt switch electrical connector, if equipped.
3. Remove the front seat (3) from the vehicle.

Installation Procedure




1. Place the front seat (3) in the vehicle.
2. Connect the seat belt switch electrical connector, if equipped.

Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install 5 bolts that secure the front seat assembly to the vehicle.

Tighten the seat adjuster mounting bolts to 18 Nm (13 lb ft).