DTC 042
CONDITIONS FOR SETTING THE DTCThe signal received by the BCM from a remote control door lock transmitter was not assigned to the BCM.
ACTION TAKEN WHEN THE DTC SETS
All of the remote control door lock transmitter functions do not operate.
CONDITIONS FOR CLEARING THE DTC
DTC 42 is set when all of the following conditions occur:
^ The BCM is in the diagnostic mode.
^ Any button on the remote control door lock transmitter is pressed.
^ The BCM does not recognize the transmitter
DTC 42 is automatically cleared after it is displayed. Any button on the remote control door lock transmitter must be pressed again to display DTC 42.
DIAGNOSTIC AIDS
DTC 42 may be set due to the following conditions:
^ The transmitter was defective.
^ A transmitter was used without programming it to the BCM.
^ Another transmitter was used in the immediate area.
TEST
Steps 1-4:
