Trim Plate Replacement - Front Floor Console

REMOVAL PROCEDURE




1. Position the gear selector to the Neutral position.
2. Release the front floor console trim plate from the front floor console, using a small flat-bladed tool.




3. Remove the front floor console trim plate by rotating 90° and guiding it over the shift handle.

INSTALLATION PROCEDURE




1. Position the front floor console trim plate over the gear selector knob sliding down and rotating 90°.




2. Align the front floor console trim plate retainers to the slots in the front floor console.
3. Install the front floor console trim plate, pressing into place until fully seated.
4. Reposition the gear selector to the Park position.