C0267

DTC C0267





Circuit Description
The brake fluid level switch monitors the level of brake fluid in the master cylinder. When the BCM sees the brake fluid level switch input grounded, it sends a serial data message to the IPC requesting illumination of the red Brake indicator.

Conditions for Funning the DTC
The ignition is ON.

Conditions for Setting the DTC
Low brake fluid is detected for 2 seconds.

Action Taken When the DTC Sets
The red Brake warning indicator turns ON.

Conditions for Clearing the DTC
^ The condition for the DTC is no longer present (the DTC is not current) and you used the scan tool Clear DTC function.
^ The EBCM automatically clears the history DTC when a current DTC is not detected in 100 consecutive drive cycles.

Diagnostic Aids
Inspect the master cylinder reservoir for the proper brake fluid level.