Head Up Display Module Replacement

REMOVAL PROCEDURE




1. Remove the instrument panel (IP) upper trim panel.
2. Remove the instrument panel cluster (IPC) head up display (HUD) bolts.
3. Disconnect the electrical connector from the HUD.
4. Remove the HUD.

INSTALLATION PROCEDURE




1. Connect the electrical connector to the IPC HUD.
2. Install the HUD.

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the HUD bolts.

Tighten
Tighten the bolts to 2 N.m (18 lb in).

4. Install the IP upper trim panel.