Torque Converter Cover: Service and Repair

Torque Converter Cover Replacement

Removal Procedure





1. Raise the vehicle. Support the vehicle.
2. Remove the transaxle cooler line clip from the transaxle.
3. Remove the converter cover bolts.
4. Remove the converter covers.

Installation Procedure





1. Install the converter covers.

Notice: Refer to Fastener Notice in Service Precautions

2. Install the converter cover attaching bolts.
^ Tighten the bolts to 13 Nm (115 inch lbs.).
3. Install the transaxle cooler line clip to the transaxle.
4. Lower the vehicle.