Garnish Molding Replacement - Windshield Pillar

Garnish Molding Replacement - Windshield Pillar

Removal Procedure





1. Pull the front door weatherstrip from the pinchweld flange to expose the windshield pillar garnish molding.
2. Pull on the windshield pillar garnish molding to disengage the retainer clips.
3. Remove the windshield pillar garnish molding from the vehicle.



Installation Procedure





1. Position the windshield pillar garnish molding to the windshield pillar.
2. Install the windshield garnish molding, pressing into place until the retainer clips are fully seated.
3. Pressthe door weatherstrip back onto the windshield pinchweld flange.