Latch Replacement - Lift Gate Window

Latch Replacement - Lift Gate Window

Removal Procedure





1. Open the lift gate.
2. Remove the lift gate trim panel. Refer to Trim Panel Replacement - Lift Gate (Service and Repair) .
3. Disconnect the window latch electrical connector (2) from the lift gate harness (1).
4. Remove the window latch electrical connector retainer (3) from the lift gate (4).
5. Close the lift gate.




6. Open the lift gate window.
7. Remove the bolts (3) from the rear lift gate window connector (4).
8. Remove the rear lift gate window connector (4) away from the lift gate (5).
9. Remove the bolts (2) from the lift gate window latch (1).
10. Pull lift gate window latch (1) away from lift gate (5) and disconnect the rod from the latch.



Installation Procedure





1. Connect the rod to the lift gate window latch.
2. Install the lift gate window latch (1) to the lift gate (5).

Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the bolts (2) to the lift gate window latch (1).

Tighten the lift gate window latch bolts (2) to 7.0 N.m (62 lb in).

4. Install the rear lift gate window connector (4) to the lift gate (5).

Notice: Refer to Fastener Notice in Cautions and Notices.

5. Install the bolts (3) to the lift gate window connector (4).

Tighten the lift gate window connector bolts (3) to 7.0 N.m (62 lb in).

6. Close the lift gate window.




7. Open the lift gate.
8. Install the lift gate window latch electrical connector retainer (3) to the lift gate (4).
9. Connect the lift gate window latch electrical connector (2) to the lift gate harness (1).
10. Install the lift gate trim panel. Refer to Trim Panel Replacement - Lift Gate (Service and Repair) .
11. Close the lift gate.