Seat Back Cover Replacement - Front (Except Fold Flat)

Seat Back Cover Replacement - Front (Except Fold Flat)

Removal Procedure

1. Remove the seat from the vehicle. Refer to Seat Replacement - Front Bucket (Seat Replacement - Front Bucket) .
2. Remove the seat trim panel. Refer to Trim Panel Replacement - Front Seat (Trim Panel Replacement - Front Seat) .
3. Remove the seat cushion pad as required. Refer to Seat Back Pad Replacement - Front (Seat Back Pad Replacement - Front) .
4. Remove the J-hook on the bottom of the seat back trim.




5. Pull the trim half-way up the seat. Use your hand to disengage the hook and loop retainers on the seat back pad.
6. Remove the head restraint retainers. Refer to Head Restraint Retainer Replacement - Front Seat (Head Restraint Retainer Replacement - Front Seat) .
7. Remove the seat back cover by pulling the cover up and over the pad.



Installation Procedure

1. Install the seat back cover and pull the cover one third down.
2. Install the head restraint retainers but not the head restraint. Refer to Head Restraint Retainer Replacement - Front Seat (Head Restraint Retainer Replacement - Front Seat) .
3. Pull the trim all the way down.
4. Install the J-hook on the seat trim bottom edge.




5. Use firm hand pressure to fasten the hook and loop retainers, securing the cover to the pad.
6. Install the seat cushion pad. Refer to Seat Back Pad Replacement - Front (Seat Back Pad Replacement - Front) .
7. Install the seat trim panel. Refer to Trim Panel Replacement - Front Seat (Trim Panel Replacement - Front Seat) .
8. Install the seat in the vehicle. Refer to Seat Replacement - Front Bucket (Seat Replacement - Front Bucket) .