Valve Cover: Service and Repair

Camshaft Cover Replacement

Removal Procedure
1. Remove the air cleaner outlet resonator.
2. Remove the positive crankcase ventilation (PCV) hose.
3. Remove the fuel line bracket.





4. Remove the ignition coil and module assembly.





5. Remove the ground strap retaining stud from the camshaft cover and disconnect the ground strap.





6. Remove the camshaft cover bolts.
7. Remove the camshaft cover.

Installation Procedure





1. Notice: Refer to Fastener Notice in Service Precautions.

Install the camshaft cover and bolts.
^ Tighten the camshaft cover bolts to 10 Nm (89 inch lbs.).





2. Install the ground strap to the camshaft cover.
^ Tighten the ground strap stud to 10 Nm (89 inch lbs.).





3. Install the ignition coil and module assembly.
4. Install the fuel pipe bracket.
^ Tighten the fuel pipe bracket bolt to 10 Nm (89 inch lbs.).
5. Install the air cleaner outlet resonator.