Power Windows Inoperative - One or Both Front Windows

POWER WINDOWS INOPERATIVE - ONE OR BOTH FRONT WINDOWS

CAUTION: When using an external power source to provide power to a component or circuit, always use a fused jumper wire with the proper amp rating for the component or circuit being tested. Failure to use a fused jumper wire may result in accidental overload and may cause personal injury or damage to the component or circuit.

IMPORTANT: This table is for vehicles equipped with front and rear power windows.

TEST

Step 1 - Step 12:

Step 13 - Step 19:

Step 20 - Step 22: