EGR Valve: Service and Repair

Exhaust Gas Recirculation Valve Replacement

Removal Procedure




Warning: Refer to Battery Disconnect Warning (Battery Disconnect Warning).

1. Disconnect the negative battery cable.
2. Disconnect the electrical exhaust gas recirculation (EGR) valve electrical connector.
3. Remove the EGR valve retaining bolts.
4. Remove the EGR valve.

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the EGR valve with the bolts.

Tighten the electrical EGR valve retaining bolts to 30 Nm (22 lb ft).

2. Connect the EGR valve electrical connector.
3. Connect the negative battery cable.