Sunroof / Moonroof Switch: Service and Repair

Sunroof Switch Replacement

Removal Procedure




Warning: Refer to Battery Disconnect Warning (Battery Disconnect Warning).

1. Disconnect the negative battery cable.
2. Pry off the interior courtesy lamp lens.
3. Remove the screws and the lamp/power sunroof control switch.
4. Disconnect the electrical connector.

Installation Procedure




1. Connect the electrical connector.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the lamp/power sunroof control switch with the screws and tighten to 4 Nm (35 lb in).
3. Install the interior courtesy lamp lens.
4. Connect the negative battery cable.