Manifold Pressure/Vacuum Sensor: Service and Repair

Manifold Absolute Pressure Sensor Replacement

Removal Procedure




Warning: Refer to Battery Disconnect Warning (Battery Disconnect Warning).

1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (Service and Repair).
2. Disconnect the manifold air pressure (MAP) sensor connector.
3. Remove the MAP sensor (1).

Installation Procedure




1. Install the MAP sensor (1).
2. Connect the MAP sensor connector.
3. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (Service and Repair).