Engine Mount Snubber Replacement

Engine Mount Snubber Replacement

Removal Procedure




1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement (NU6) Air Cleaner Assembly Replacement (NU6)Air Cleaner Assembly Replacement (NT7) Air Cleaner Assembly Replacement (NT7).
2. Remove the engine mount snubber to engine mount snubber bracket bolts (1).




3. Rotate the engine mount snubber (2) to the vertical position in order to access the lower bolt.
4. Remove the engine mount snubber bolt (1).
5. Remove the engine mount snubber.

Installation Procedure




1. Install the engine mount snubber (2) in to the engine compartment side rail. Ensure that the tab on the snubber is inserted into the hole in the side rail.

Caution: Refer to Fastener Caution Fastener Caution.

2. Install the engine mount snubber bolt (1) and tighten to 50 Nm (37 lb ft).
3. Rotate the engine mount snubber to the horizontal position.




4. Install the engine mount snubber to engine mount snubber bracket bolts (1) and tighten the bolts to 50 Nm (37 lb ft).
5. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement (NU6) Air Cleaner Assembly Replacement (NU6)Air Cleaner Assembly Replacement (NT7) Air Cleaner Assembly Replacement (NT7).