Hazard Warning Switch: Service and Repair

Hazard Warning Switch Replacement

Removal Procedure




1. Remove the instrument panel (I/P) center trim panel. Refer to Instrument Panel Center Trim Panel Replacement (Instrument Panel Center Trim Panel Replacement).
2. Disconnect the hazard warning switch electrical connector.
3. Press down on the tabs (1) and remove the hazard warning switch from the I/P center trim panel.

Installation Procedure




1. Engage the retaining tabs (1) and install the hazard warning switch to the I/P center trim panel.
2. Connect the hazard warning switch electrical connector.
3. Install the I/P center trim panel. Refer to Instrument Panel Center Trim Panel Replacement (Instrument Panel Center Trim Panel Replacement).