Parking Brake Warning Switch: Service and Repair

Parking Brake Indicator Switch Replacement

Removal Procedure




1. Disengage the 8 retainers and remove the rear upper console trim panel.




2. Remove the screw from the park brake switch.
3. Disconnect the park brake switch electrical connector (1).

Installation Procedure




1. Install the park brake switch (2) and the screw (1) to the park brake lever.




2. Connect the park brake switch electrical connector (1).
3. Inspect the park brake lever travel. Adjust the park brake lever travel if necessary. Refer to Parking Brake Adjustment (All Wheel Drive and GT) (Adjustments)Parking Brake Adjustment (Except All Wheel Drive and GT) (Adjustments).




4. Install the rear upper console trim and engage the 8 retainers.