Test Point 6

TEST POINT 6
Shiftlock P/N lock
Open circuit/short to ground, short to B+

DTC 63

Fault Effect: Fault is only entered in the fault memory.

Note:
When the ignition is on, a transmission range can be selected from the selector lever position P or N only if the foot brake is pressed in addition.

1. Check lifting solenoid with wiring. To do this, connect an ohmmeter to control module connector pins 2 and 53 and measure the resistance.

Nominal value: 60 - 90 ohms

2. Check wire from control module connector pin 2 to the lifting solenoid connector pin 5 for continuity, short to ground and short to B+.

Note:
The lifting solenoid connector is accessible only if the centre console is removed.