Test Point 17

TEST POINT 17
Throttle potentiometer

DTC 117

1. Connect voltmeter to control module connector pin 53 (+) and pin 34 (-)

Ignition "ON"

Display: 5 V

2. Connect voltmeter to control module connector pin 44 (+) and pin 34 (-)

Ignition "ON"

Display: in idle position, approx. 0.55 V
with wide open throttle approx. 4.5 V

3. measure resistance

Ignition "OFF"

Pull control module connector off the adapter, as otherwise the measurement result will be falsified.

Connect ohmmeter to pin 44 and pin 34

Display: Idle position
Wide open throttle