G9.6 - F - Filler
G 9.6 F - Filler
G 9.6.1 Glasurit(R) Non-Sanding Filler, light gray 285-31 VOC
G 9.6.1.1 Processing
G 9.6.2 Glasurit(R) VOC Non-Sanding Filler, white 285-38 VOC
G 9.6.2.1 Processing
G 9.6.3 Glasurit(R) VOC Non-Sanding Filler, dark gray 285-39 VOC
G 9.6.3.1 Processing
G 9.6.4 Glasurit(R) HS VOC Tintable Filler, transparent 285-95 VOC
G 9.6.4.1 Application as a wet-on-wet filler
G 9.6.4.2 Application as an abrasive filler
G 9.6.1 Glasurit(R) Non-Sanding Filler, light gray 285-31 VOC
WARNING: -> 2 "Safety regulations" and read the product-specific safety instructions on the container labels.
Usage:
- Wet-on-wet filler (efficient paint finish)
Properties:
- No sanding and drying
- Good spray reliability
- Good topcoat adherence
- Good weather resistance
NOTE:
- Before applying filler: Fine-sand the filled areas and old paintwork with P280-320 (dry)
- Exposed steel, galvanized sheet steel, aluminum and areas sanded through to bare metal must be primed with Glasurit(R) Etch Primer Filler 283-150 or 285-16 VOC before using Glasurit(R) Non-Sanding Filler, light gray 285-31 VOC
- Use guide coat (better sanding results)
VOC value:
- < 540 g/l
G 9.6.1.1 Processing
G 9.6.2 Glasurit(R) VOC Non-Sanding Filler, white 285-38 VOC
Warning: -> 2 "Safety regulations" and read the product-specific safety instructions on the container labels.
Description:
- Wet-on-wet filler (efficient paint finish)
Properties:
- No sanding and drying
- Good spray reliability
- Good topcoat adherence
- Good weather resistance
NOTE:
- Can be mixed with Glasurit(R) VOC Non-Sanding Filler, dark gray 285-39 VOC at any ratio to create different gray levels
- Before applying filler: Fine-sand the filled areas and old paintwork with P280-320 (dry); use guide coat
- Prime areas sanded through to bare material with Glasurit(R) Etch Primer Filler 283- 150 or Glasurit(R) HS VOC Thermo Primer Filler 285-16 VOC
VOC value:
- < 540 g/l
G 9.6.2.1 Processing
G 9.6.3 Glasurit(R) VOC Non-Sanding Filler, dark gray 285-39 VOC
WARNING: -> 2 "Safety regulations" and read the product-specific safety instructions on the container labels.
Description:
- Wet-on-wet filler (efficient paint finish)
Properties:
- No sanding and drying
- Good spray reliability
- Good topcoat adherence
- Good weather resistance
NOTE:
- Can be mixed with Glasurit(R) VOC Non-Sanding Filler, white 285-38 VOC at any ratio to create different gray levels
- Before applying filler: Fine-sand the filled areas and old paintwork with P280-320 (dry); use guide coat
- Prime areas sanded through to bare material with Glasurit(R) Etch Primer Filler 283-150 or Glasurit(R) HS VOC Thermo Primer Filler 285-16 VOC
VOC value:
- < 540 g/l
G 9.6.3.1 Processing
G 9.6.4 Glasurit(R) HS VOC Tintable Filler, transparent 285-95 VOC
WARNING: -> 2 "Safety regulations" and read the product-specific safety instructions on the container labels.
Usage:
- Transparent filler component used as a colored filler when Glasurit(R) HS 2C Topcoat 22- is added
- Abrasive filler and wet-on-wet filler
- Use as a balanced colored filler for color shades with bad coverage and for areas at risk from chippings
Properties:
- Saves on spraying time and topcoat paint material
- Recycling of topcoat paint leftovers 22-
NOTE:
- When applying as a wet-on-wet filler, only use Glasurit(R) HS VOC Thermo Primer Filler 285-16 VOC as the primer
- Do not add any 22 line base colors, only mix with 522-M0. Stir mixtures containing Glasurit(R) HS VOC Tintable Filler, transparent 285-95 VOC and Glasurit(R) HS 2C Topcoat 22- immediately after adding the components
- Seal open cans well or leave them hanging in the mixing stand with the stirring lid on
- The filler must be elastic-rendered with Glasurit(R) Softface Additive 522-111 for use on plastic components
VOC value:
- < 540 g/l
G 9.6.4.1 Application as a wet-on-wet filler
G 9.6.4.2 Application as an abrasive filler
G9.7 - D - Topcoat