702019 Removing and installing cover for instrument panel (defroster cover)

WM 702019 Removing and installing cover for instrument panel (defroster cover)

Preliminary work

Remove A-pillar trim panel. => 705719 Removing and installing A-pillar trim - section on "Removing"

Removing cover for instrument panel (defroster cover)

Removing cover for centre instrument panel (defroster cover)





Overview, removing and installing cover for instrument panel (defroster cover)

1. Insert plastic wedge under instrument panel cover (defroster cover) centre -1- and lever out in upward direction -arrow-.





Removing middle cover

2. Disconnect plug connection for sun sensor. => Removing and installing sun sensor.

Removing cover for instrument panel (defroster cover) on right and left





Overview, removing and installing cover for instrument panel (defroster cover)

1. Insert plastic wedge under instrument panel cover (defroster cover) left and right -4- and lever out of sheetmetal clips -5-.





Removing side cover

Installing cover for instrument panel (defroster cover)

Installing cover for instrument panel (defroster cover) on right and left





Overview, removing and installing cover for instrument panel (defroster cover)

1. Check sheetmetal clips -5- for deformation; replace if necessary.





Installing side cover

2. Clip cover for instrument panel (defroster cover) into place on left and right -4-.

Installing cover for centre instrument panel (defroster cover)





Overview, removing and installing cover for instrument panel (defroster cover)

1. Lock plug connection for sun sensor. => Removing and installing sun sensor.
2. Position cover for centre dashboard (defroster cover) -1- and clip in -arrow-.





Install middle cover

Subsequent work

Reworking

Install A-pillar trim panel. => 705719 Removing and installing A-pillar trim - section on "Installing"