Liftgate Strut Replacement

Liftgate Strut Replacement

Removal Procedure

Warning

When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

1. Open and support the liftgate.
Caution: Refer to PSD SIE TITLE Error: SIE linked to empty Cell ID 178196 .




2. Lift up the retainer clips on the liftgate struts using a small flat-bladed tool.
3. Remove the upper end of the liftgate struts from the ball joint.
4. Remove the lower end of the liftgate struts from the ball joint.
5. Remove the liftgate struts from the liftgate.

Installation Procedure




1. Position the liftgate struts to the liftgate.
2. Install the upper end of the liftgate struts to the ball joint. Press the struts into place until fully seated.
3. Install the lower end of the liftgate struts to the ball joint. Press the struts into place until fully seated.
4. Remove the support device from the liftgate.
5. Close the liftgate.