Operation CHARM: Car repair manuals for everyone.
Home >> Saab >> 2009 >> 9-7X L6-4.2L >> Repair and Diagnosis >> Transmission and Drivetrain >> Differential Assembly >> Service and Repair >> Removal and Replacement >> Front Drive Axle >> Differential Carrier Assembly Final Assembly

Differential Carrier Assembly Final Assembly




Differential Carrier Assembly Final Assembly

Special Tools
* J 45225 Axle Seal Installer
* J 8092 Universal Driver Handle - 3/4 in - 10

1. Inspect the alignment mark between the differential bearing adjuster and the differential carrier assembly case. If the line between the differential bearing adjuster and the differential carrier assembly case is not aligned, re-align the 2 components as necessary.




2. Install the left side inner shaft seal using the J 45225 (2) and the J 8092 (1).




3. Install the right side inner shaft seal using the J 45225 (2) and the J 8092 (1).

Caution: Refer to Component Fastener Tightening Caution (Component Fastener Tightening Caution).

4. Install the drain plug and tighten to 32 Nm (24 ft. lbs.).
5. Install the fill plug and tighten to 32 Nm (24 ft. lbs.).

pro multis · About Operation CHARM