Automatic Volume Control: Service and Repair
Radio Volume Compensator Interior Noise Microphone Replacement
Removal Procedure
1. Remove the overhead console. Refer to Roof Console Replacement (Roof Console Replacement).
2. Disconnect the microphone electrical connector (3).
3. Remove the 2 retaining screws to the microphone.
4. Remove the microphone (2) from the overhead console.
Installation Procedure
1. Install the microphone (2) to the overhead console.
Caution: Refer to Fastener Caution (Fastener Caution).
2. Install the 2 microphone retaining screws and tighten to 0.8 Nm (7 in. lbs.).
3. Connect the microphone electrical connector (3).
4. Install the overhead console. Refer to Roof Console Replacement (Roof Console Replacement).