Transmission Control Replacement

Transmission Control Replacement

Removal Procedure




1. Remove the front floor console. Refer to Console Replacement (Console Replacement).




2. Disconnect the shift lock control solenoid wiring harness.
3. Remove the end of the range selector cable (1) from the transmission control ball stud.
4. Remove the range selector cable (2) from the floor shift control.




5. Remove the transmission control bolts.
6. Remove the transmission control.

Installation Procedure




1. Install the transmission control.
Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the transmission control bolts and tighten to 25 Nm (18 ft. lbs.).




3. Install the range selector cable (2) to the floor shift control.
4. Install the end of the range selector cable (1) to the transmission control ball stud.
5. Connect the shift lock control solenoid wiring harness.




6. Install the front floor console. Refer to Console Replacement (Console Replacement).
7. Check for proper operation of the floor shift control.
8. Adjust the range selector cable if necessary. Refer to Range Selector Lever Cable Adjustment (Adjustments).