Operation CHARM: Car repair manuals for everyone.

Removal and Replacement




Throttle Body Assembly Replacement

Removal Procedure




1. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (Air Cleaner Outlet Duct Replacement).
2. Disconnect the engine wiring harness electrical connector (3) from the throttle body (4).




3. Remove the throttle body bolts (2).
4. Remove the throttle body (3) and gasket (1). Discard the gasket.

Installation Procedure




1. Position a NEW throttle body gasket (1) to the upper intake manifold.
2. Position the throttle body (3) to the upper intake manifold.

Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the throttle body bolts (1). Tighten the bolts to 10 Nm (89 lb in).




4. Connect the engine wiring harness electrical connector (3) to the throttle body (4).
5. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (Air Cleaner Outlet Duct Replacement).