Transmission Mount Replacement - Left Side

Transmission Mount Replacement - Left Side

Removal Procedure

1. Remove the battery tray support bracket if equipped with 2.4L (LAT). Refer to Battery Tray Support Bracket Replacement (Battery Tray Support Bracket Replacement).
2. Remove the battery box if equipped with 2.4L (LE5). Refer to Battery Box Replacement (Battery Box Replacement).
3. Install the engine support fixture. Refer to Engine Support Fixture (Engine Support Fixture).
4. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).




5. Remove the front transmission mount thru bolt.




6. Remove the rear transmission mount thru bolt (1).
7. Lower the vehicle.




8. Remove the transmission mount to transmission mount spacer bolts (1).
9. Using the engine support, lower the transmission in order to remove the transmission mount spacer bolts.




10. Remove the transmission mount spacer bolts and spacer.




11. Remove the transmission mount to frame rail bolts.
12. Remove the left transmission mount.

Installation Procedure




1. Install the left transmission mount.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the transmission mount to frame rail bolts and tighten to 27 Nm (20 lb ft).




3. Install the transmission mount spacer and bolts and tighten the bolts to 50 Nm (37 lb ft).
4. Using the engine support, raise the transmission until the transmission mount spacer contacts the left transmission mount.




5. Install the transmission mount to transmission mount spacer bolts (1) and tighten to 50 Nm (37 lb ft).
6. Raise the vehicle.




7. Install the rear transmission mount thru bolt (1) and tighten to 100 Nm (74 lb ft).




8. Install the front transmission mount thru bolt and tighten to 110 Nm (81 lb ft).
9. Lower the vehicle.
10. Remove the engine support fixture. Refer to Engine Support Fixture (Engine Support Fixture).
11. Install the battery box if equipped with 2.4L (LE5). Refer to Battery Box Replacement (Battery Box Replacement).
12. Install the battery tray support bracket if equipped with 2.4L (LAT). Refer to Battery Tray Support Bracket Replacement (Battery Tray Support Bracket Replacement).