Generator Battery Replacement

Generator Battery Replacement

Removal Procedure

Note: If one battery requires replacement, the other batteries also are to be replaced.




1. Remove the generator battery temperature sensor wiring harness. Refer to Generator Battery Temperature Sensor Wiring Harness Replacement (Service and Repair).
2. Remove the generator battery nuts (1-4) from the battery cables.





Note: Note original routing of battery cables to ensure proper installation.

3. Remove the generator battery cables (1-4) from the batteries.




4. Remove the generator battery bolts (1).
5. Remove the generator battery.




6. If required, remove the generator battery temperature sensor (1) from the battery.

Installation Procedure




1. If required, install the generator battery temperature sensor (1) to the battery.




2. Install the generator battery.

Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the generator battery bolts (1) and tighten to 10 Nm (89 lb in).




4. Install the generator battery cables (1-4) to the batteries.




5. Install the generator battery nuts (1-4) to the battery cables and tighten the nuts to 8 Nm (71 lb in).
6. Install the generator battery temperature sensor wiring harness. Refer to Generator Battery Temperature Sensor Wiring Harness Replacement (Service and Repair).