16. Fluid Pump Removal

Fluid Pump Removal
^ Tools Required
- J 43445 Fluid Pump Remover





1. Remove the 2 remaining bolts securing the fluid pump assembly to the transmission case assembly.





2. Position the forked clamp of the J 43445 under the splines of the fluid pump shaft.
3. Position the support bracket of the J 43445 on the transmission case assembly.
4. Turn the hex nut of the J 43445 clockwise in order to lift the fluid pump assembly out of the transmission case assembly.





5. Remove the fluid pump assembly.
6. Remove the J 43445.