Inflatable Restraint Front End Sensor Replacement - Left Side

Inflatable Restraint Front End Sensor Replacement - Left Side

Removal Procedure

Caution: Refer to Battery Disconnect Caution (Battery Disconnect Caution) .
1. Disconnect the battery.
Remove the positive and negative cables.
2. Wait 1 minute for the airbag to deactivate.
3. Remove the battery.
Remove the bolt.




4. Remove the airbag sensor.

* Remove the 2 bolts (1).
* Disconnect the wiring harness plug and remove the sensor.




Installation Procedure


Notice: Refer to Fastener Notice (Fastener Notice) .

1. Install the airbag sensor.
Insert the sensor and connect the wiring harness plug.

Tighten the 2 bolts to 6 N.m (53 lb in).

2. Install the battery.
3. Connect the battery.

Tighten the bolt to 5 N.m (44 lb in).

4. Perform the readiness inspection.
5. For programming procedures, refer to Control Module References (Programming and Relearning) .