Valve Cover: Service and Repair
Camshaft Cover Replacement
Removal Procedure
1. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (Air Cleaner Outlet Duct Replacement).
2. Remove the battery box cover, LAT only.
3. Disconnect the engine wiring harness electrical connectors (2, 3) from the intake and exhaust camshaft position actuator solenoid valves.
4. Remove the ignition coils. Refer to Ignition Coil Replacement (Service and Repair).
5. Remove the engine harness clips (4) from the cover.
6. Reposition the engine wiring harness out of the way.
7. Remove the fuel feed line retainers (1, 2) from the engine brackets.
8. Remove the camshaft cover bolts.
9. Remove the camshaft cover.
Installation Procedure
Caution: Refer to Fastener Caution (Fastener Caution).
1. Install the camshaft cover and bolts. Tighten the bolts to 10 Nm (89 lb in).
2. Install the feed line retainers (1, 2) to the engine brackets.
3. Install the ignition coils. Refer to Ignition Coil Replacement (Service and Repair).
4. Position the engine wiring harness and install the clips (4) to the cover.
5. Connect the engine wiring harness electrical connectors (2, 3) to the intake and exhaust camshaft position actuator solenoid valves.
6. Install the battery box cover, LAT only.
7. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (Air Cleaner Outlet Duct Replacement).