Transmission Rear Mount Replacement

Transmission Rear Mount Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).
2. Remove the left tire and wheel. Refer to Tire and Wheel Removal and Installation (Service and Repair).
3. Using a suitable jack stand, support the rear of the powertrain.
4. Remove the exhaust manifold. Refer to Exhaust Manifold Replacement (LAT and LE5) (Service and Repair)Exhaust Manifold Replacement (LE5 With MH8) (Service and Repair).




5. Remove the transmission mount to bracket through bolt (1).




6. Remove the transaxle brace bolts (1, 3).
7. Remove the transaxle brace (2).




8. Remove the transmission mount to transmission bolts (2).
9. Remove the transmission mount (1).

Installation Procedure




1. Install the transmission mount (1).

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the transmission mount to transmission bolts (2) and tighten to 90 Nm (66 lb ft).




3. Install the transaxle brace (2).
4. Install the transaxle brace bolt (1) and tighten to 50 Nm (37 lb ft).
5. Install the transaxle brace bolt (3) and tighten to100 Nm (74 lb ft).




6. Install the transmission mount to bracket through bolt (1) and tighten to 90 Nm (66 lb ft).
7. Install the exhaust manifold. Refer to Exhaust Manifold Replacement (LAT and LE5) (Service and Repair)Exhaust Manifold Replacement (LE5 With MH8) (Service and Repair).
8. Remove the jack stand.
9. Install the left tire and wheel. Refer to Tire and Wheel Removal and Installation (Service and Repair).
10. Lower the vehicle.