Exhaust Manifold Heat Shield Replacement - Left Side

Exhaust Manifold Heat Shield Replacement - Left Side (LY7) (3.6L)

Removal Procedure
Warning: Refer to Exhaust Service Warning (Service Precautions)

Warning: Refer to Protective Goggles and Glove Warning (Protective Goggles and Glove Warning)





1. Remove the bank 2 sensor 1 heated oxygen sensor (HO2S). Refer to Heated Oxygen Sensor Replacement - Bank 2 Sensor 1 (Service and Repair).
2. Remove the exhaust manifold heat shield bolts.
3. Remove the exhaust manifold heat shield.

Installation Procedure




1. Install the exhaust manifold heat shield.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the exhaust manifold heat shield bolts and tighten to 10 Nm (89 lb in).
3. Install the bank 2 sensor 1 HO2S. Refer to Heated Oxygen Sensor Replacement - Bank 2 Sensor 1 (Service and Repair).