Reading and Clearing Diagnostic Trouble Codes

CRUISE CONTROL: CRUISE CONTROL SYSTEM: DTC CHECK / CLEAR

DTC CHECK / CLEAR

1. CHECK DTC
(a) Connect an intelligent tester or Techstream to the DLC3.
(b) Turn the ignition switch ON.
(c) Turn the tester on.
(d) Enter the following menus:
(1) Intelligent tester - Select: DIAGNOSIS / ENHANCED OBD II / DTC INFO / CURRENT CODES.
(2) Techstream - Select: Powertrain / Engine and ECT / Trouble Codes.
(e) Read the DTCs.
2. CLEAR DTC
(a) Connect an intelligent tester or Techstream to the DLC3.
(b) Turn the ignition switch ON.
(c) Turn the tester on.
(d) Enter the following menus:
(1) Intelligent tester - Select: DIAGNOSIS / ENHANCED OBD II / DTC INFO.
(2) Techstream - Select: Powertrain / Engine and ECT / Trouble Codes.
(e) Erase the DTCs.